NEWS
BAEG News & Resources
Chisel Paste
Q&A Chisel paste How much chisel paste should be used in a shift? The answer to how much chisel paste is used in a shift is highly dependent on application and frequency of use. For example, in a high production, bulk excavation application, it is not uncommon for 2 or 3 grease cartridges per shift […]
Atlas Copco Germany Training
Atlas Copco Training Kris & Ben were offered the opportunity to attend intensive Atlas Copco training in Essen, Germany. Over the 3 days they were there they received hands on learning and training on the Atlas Copco products we sell and service, as well as other products related to our business. The training included information […]
Changing Lubricant Cartridge
Are you changing the lubricant cartridge the right way on HB/MB Atlas Copco Hammers? Follow these easy steps… Step 1: Open the cartridge by taking off the cap and, on sealed cartridges, by cutting off the seal above the cone. IMPORTANT: Do not cut off or damage the cone itself! Step 2: […]
Atlas Copco ES60 Hydraulic Hammer
Atlas Copco ES60 Hydraulic Hammer operating on a Toyota Skid Steer Recently one of QLD customers purchased a new Atlas Copco ES60 hydraulic hammer with the intention of it being fitted to a Toyota skid steer. With the hammer being mounted to a special frame, it allowed our customer to efficiently work at different/difficult angles to […]
New Model Atlas Copco MB1650 Hammer
New Atlas Copco Hydraulic Hammer Model Atlas Copco have released a new MB hammer model – the MB1650, which replaces the MB1700. The same hydraulic input as the MB1700 but with a compact design and lower weight. Features include Lower weight, but same performance More compact design No high pressure accumulator New service window design Same […]
CASE STUDY: BOYNE SMELTERS
Case Study: Boyne Smelters The team at BAEG worked with Graham Tombling, Carbon Maintenance Technical at Pacific Aluminium to provide a technical analysis of this sites hammer station installation and recommendations on how to maximise the hammer operation and how to drastically reduce spare parts costs, servicing costs and downtime. In the following case study […]
TRADE IN & TRADE UP
Time for a new SB Hammer? Well take advantage of this great trade-in deal from Atlas Copco and BA Equipment Group… AND if you upgrade before June 30 EOFY, you can also take advantage of the government’s tax-time incentive! The Atlas Trade-In Trade-Up Deal: Quite simply, when you trade in your old hammer you SAVE 20% off the […]
Atlas Copco SB452 Hammer on 5.5T Excavator
Atlas Copco Magnets
Atlas Copco Hydro Magnets available from BA Equipment Group Looking for a reliable magnet? Look no further than the new Atlas Copco range of Hydro Magnets. The Atlas Copco Hydro Magnet is a highly efficient way of adding magnetic lifting capability to your fleet of hydraulic handlers. The Hydro Magnet will help you save on equipment […]