How to Correctly Measure Excavator Pickup Dimensions
It is essential to note that there are several different pickup measurements that need to be taken.
Each of these measurements plays a crucial role in ensuring that the attachment fits properly and performs effectively. Inaccuracies in any of these measurements can lead to significant problems down the line, such as decreased productivity and potential damage to both the attachment and the excavator.
Our Hire Manager will always have you confirm the pickup measurement prior to setting up any attachment. The machine hitch measurements can be confirmed by following the basic guide listed below & all you will need is a tape measure.
Measurements should be given in millimetres for all required dimensions, the make & model of the machine should also be supplied at the same time.
A: Front pin diameter
B: Rear pin diameter (In most cases A&B will be the same diameter)
C: Distance between pin centres (Centre of front pin to centre of rear pin). If your excavator has a multi centre quick hitch – please advise the pin centre range (Min and Max)
D: Measurement between front ears (Inside of boss to inside of boss)
E: Measurement between rear ears (In most cases D&E will be the same distance)
Supplying accurate pickup measurements for your excavator is essential for ensuring a proper fit and performance of your hire attachment, and taking the time to measure each dimension correctly can save you time, and money, and prevent potential damage to both the attachment and excavator.
If you’re uncertain about how to take measurements, please call your local BAEG office.