Q&A Break troubleshooting  If you’re having problems with your breaker, please refer to following checklist to see if the problem can be resovled. If the problem still persists, please contact the BA service team. Click here to download the PDF version.

Solid Body (SB) Hammer Maintenance & Storage Tips Epiroc SB Hammer Q&A Many who have bought the Epiroc Solid Body (SB) use their breakers on an irregular basis, but when they need them, they need to work first time, every time. We've previously spoken about...

Q&A Working tools  Does it matter if an attachment is used on several machines? Yes. Each attachment has specific hydraulic operating pressures and flows which must be maintained to prevent damage to the attachment. When the attachment is installed, a service tech...

Q&A Wear bushes  There is a single wear bush in SB hammers and two wear bushes (known as upper and lower) in larger EC, MB and HB hammers. Correctly used and greased, hammer wear bushes can last a very long time. There are two key factors that affect hammer bush...

Q&A Chisel paste  How much chisel paste should be used in a shift? The answer to how much chisel paste is used in a shift is highly dependent on application and frequency of use. For example, in a high production, bulk excavation application, it is not uncommon...

Are you changing the lubricant cartridge the right way on HB/MB Atlas Copco Hammers? Follow these easy steps...   Step 1: Open the cartridge by taking off the cap and, on sealed cartridges, by cutting off the seal above the cone. IMPORTANT: Do not cut off or...